Black Leaf Aluminium Grinder - 2-Part with Magnetic Closure
The Black Leaf grinder is CNC-milled from aluminium, a process that gives tighter tolerances than cast or stamped grinders. The two halves fit precisely together and turn smoothly while grinding. The diamond-shaped teeth shred herbs evenly without clogging quickly, and the built-in magnet holds the two parts in place once you close the grinder. It has a silver finish with the Black Leaf logo on the top half and comes packaged in the original Black Leaf tin.
With a diameter of 55 mm (52 mm on the inside) and a height of 18 mm, this is a compact grinder that sits well in the hand. Because it consists of two parts, it is easy to take apart for use and cleaning.
Use and Maintenance
Place a portion of herbs on the lower teeth, put the top half on and turn the two parts against each other a few times. The magnet keeps the grinder closed while grinding so nothing spills out. After use, twist the grinder open and tap the ground material into a bowl or joint. Clean the teeth regularly: resin builds up between the teeth with heavy use and can slow the grinder down. A small brush or a cotton swab with isopropyl alcohol removes most residue; let the grinder dry fully before using it again.
Specifications
- Brand: Black Leaf
- Material: aluminium (CNC-milled)
- Colour: silver
- Diameter: 55 mm outside / 52 mm inside
- Height: 18 mm
- Parts: 2
- Teeth: diamond-cut
- Closure: magnet
- Packaging: original Black Leaf tin
Looking for a different size or number of parts? Browse the full range in the grinders category at Dutch-Smart.
Heb je het artikel niet gevonden of heb je vragen? Neem gerust contact met ons op!
App ons direct via WhatsApp!
Stuur een berichtje naar 06‑30169408 en ontvang snel een persoonlijk antwoord.
WhatsApp is handig en snel, en je kunt eenvoudig foto’s of bestanden meesturen.
Geen wachttijd, gewoon direct contact.
We helpen je graag verder!
